5 Press STOP.Operation for Network Switch SystemThe procedures for using the Network switch system are almost the same aa when using the unit over anormal telephone line. When you receive calls, however, the unit will respond slightly differently asdescribed below.When you hear the telephone call ring pattern:Pick up the handset and talk normally. If you hear a slow beep, it means the call is from a fax machinetrying to send a document. Press [START/COPY] to receive the document. If you do not pick up thehandset, the fax continues to ring until the other party hangs up. If an answering machine is connected,it takes over the call.When you hear the fax call ring pattern:After the fax rings, it receives the document automatically.If you want to receive a document without ring:First, make sure the fax is in Fax/Tel model („Fax/Tel” displayed on the LCD). Then set INCOMINGRING in the RX SETTINGS to OFF. See p. 85. When someone sends a document, the fax receives itautomatically without ringing.STOPRECEIVING FAXES76
