Prepare the printer.Make sure the printer is turnedon.Make sure the paper support isnot extended.Make sure the paper thicknesslever is pressed to the uppositionPull out the paper output trayand its extension.Prepare the banner paper.Cut the banner at a crease accordingto the length you need.The minimum length is two sheets.The maximum length you can use issix sheets (66 inches or 1676 mm).Always leave an extra sheet atthe end of the banner—just incase the type runs over.Load the first sheet.Align the first sheet of thepaper with the right edge ofthe sheet feeder and slide itinto the printer until it stops.Adjust the paper guide to theleft side of the sheet.Fold the banner paper.Paper HandlingChapter 3 Paper Handling 3-21
