Most software programs automatically send control codes and ESCape sequences to the printer.However, some applications may require you to supply the commands. How you enter the control codesand ESCape sequences depend on your software program. Your software program may require you toenter the codes and sequences in a specific format, such as decimal rather than hexadecimal. For example,you can use only decimal format with MultiMate Advantage II™, Professional Write™, and PFS: FirstChoice™.Software program printer drivers may override the printer control codes embedded in adocument. This means the command will not take effect because of the way the applicationhandled it.To determine if an application is overriding your commands, print the document using ageneric driver and see if the correct commands are reflected in the printed copy. If they are,the application printer driver is overriding the commands.If you would like to receive a list of the control codes and ESCape sequences the printer recognizes, youcan use Canon's toll-free fax retrieval system to request the BJC-610 Printer Command Summary. Call1-800-526-4345 for details.Using the Printer With MS-DOS 2141 of 1 4/15/98 2:13 PM
