Turning the Printer On and OffTo turn on the printer's power, follow these steps:1. Make sure the parallel interface cable is connected to your printer and computer.2. Make sure the power cord is attached to the printer and a wall outlet.3. Press the POWER button on the operator panel.The POWER light flashes and the printer makes several sounds as it warms up andgets ready to print.When the printer is ready to print, the POWER, ON LINE, and PRINT MODE lightsare on.InitializationThe first time you turn on the printer, it performs an initialization process and flushes the print head unitto make sure the nozzles are clear. This takes approximately three minutes. It is done only once -- thefirst time you turn on the printer.As the printer flushes the print head unit, various lights flash and then stay on. These lights indicate wherethe printer is in the cleaning process.Setting Up the Printer 281 of 1 4/15/98 11:40 AM