107External ConnectionsConnecting to a ComputerE• If the (print/share) button does not light up even if you completed the userregistration, verify that the icon appears on your computer’s desktop toolbar. If itdoes not, disconnect the USB cable, restart the computer and connect thecamcorder to the computer again.3. Once the button’s blue light is on, press the (print/share) button.• The button will flash while the copying is in progress, and will go off once thecopy is completed.• The copied disc will automatically be finalized and ejected from the drive.Operation may not work properly if you connect more than one DC10/DC20camcorder to the computer at the same time. If the operation is interrupted:- “OPERATION CANCELED” will be displayed on the camcorder’s screen.- To restart the operation you will need to insert a new blank disc in yourcomputer’s DVD drive and restore the connections.- The operation will be canceled if you eject the disc from the camcorder, openthe disc tray of your computer’s DVD drive, disconnect the USB cable or runthe Roxio MyDVD for Canon software. We recommend powering the camcorder from a household power outlet while itis connected to the computer. The time required to complete the one-touch dubbing will vary depending onthe scene recording conditions and the amount of free space remaining on thesource disc. You need to have DVD playback software installed in your computer in order toplay the disc. Finalized DVD discs created with MyDVD for Canon cannot be unfinalizedusing the camcorder. For further details about restrictions when using MyDVD for Canon, refer also tothe “README” section in the software’s help modules. Refer also to the computer’s instruction manual.Transferring Recordings to the ComputerYou can transfer the movies and still images recorded on a disc, even one not yetfinalized, to your computer for further editing.1. Connect the camcorder to the computer and run MyDVD for Canon aspreviously described ( 106).2. Click on the “DVD-Video” option in the New Project tab.3. Click on the “Open Disc” icon.4. Click on the “Import” button.Thumbnails of the imported scenes and still images will be displayed in the videoproject screen.5. To save the project, click on “Save Project” from the Project Taskspalette.The scenes and still images displayed in the main screen will be saved.Recordings made in LP mode in Widescreen (16:9 aspect ratio) on a DVD-RWthat was initialized in VR mode cannot be transferred to the computer.
