Canon DC10 Instruction Manual

Also see for 0744B001 - DC 10 Camcorder: Software guide Instruction manual Instruction manual

Contents

Canon DC10 Instruction Manual Manual pdf 130 page image

130Direct Print Related MessagesAbout Canon PIXMA/SELPHY DS Printers: If the printer’s error indicator flashesor an error message appears on the printer’s operation panel, refer to the printer’sinstruction manual.Message ExplanationPAPER ERROR There is a problem with the paper. Wrong paper size is inserted, the inkcannot be used with the selected paper or paper output tray is open.NO PAPER Paper is not correctly inserted or there is no paper. If the printer isequipped with a photo paper cassette, specify the paper feed locationusing the Paper Feed switch.PAPER JAM The paper jammed during printing. Select [STOP] to cancel printing.After removing the paper, set some paper again and press the resumebutton on the printer.INK ERROR There is a problem with the ink.NO INK The ink cartridge is not inserted or is out of ink.LOW INK LEVEL The ink cartridge needs to be replaced soon. Select [CONTINUE] torestart printing.WASTE TANK FULL Waste tank is full. Select [CONTINUE] to restart printing. Consult yourdealer or a Canon Service Center listed in the Contact List provided withthe printer manual to replace the waste tank (waste ink absorber).FILE ERROR You attempted to print an image that was recorded with anothercamcorder, with a different compression, or was edited on a computer.CANNOT PRINT! You attempted to print an image that was recorded with anothercamcorder, with a different compression, or was edited on a computer.COULD NOT PRINT XIMAGESYou attempted to use the print order settings to print X images that wererecorded with another camcorder, with a different compression or wereedited on a computer.SET PRINT ORDER No still images on the memory card have been marked with a printorder.PRINT ORDERERRORYou attempted to set more than 998 still images in the print order.CANNOT TRIM You attempted to trim an image that was recorded with anothercamcorder.READJUST TRIMMING You changed the print style after you set the trimming settings.PRINTER ERROR Cancel printing. Turn off the printer and turn it back on. Check the printerstatus. If the error still persists, refer to the printer’s instruction manualand contact the appropriate customer support center or service center.PRINT ERROR Cancel printing, disconnect the USB cable and turn off the printer. After awhile, turn the printer back on and reconnect the USB cable. Check theprinter status.When you are printing using the button, check the print settings.HARDWARE ERROR Cancel printing. Turn off the printer and turn it back on. Check the printerstatus. If the printer is equipped with a battery, it might be exhausted. Insuch case, turn off the printer, replace the battery and turn it back on.COMMUNICATIONERRORThe printer is experiencing a data transfer error. Cancel printing,disconnect the USB cable and turn off the printer. After a while, turn theprinter back on and reconnect the USB cable. When you are printingusing the button, check the print settings.Or, you attempted to print from a memory card that contains a largenumber of images. Reduce the number of images.CHECK PRINTSETTINGSThe print setting cannot be used for printing with the button.PRINTER IN USE The printer is in use. Check the printer status.