86Dividing a SceneYou can divide your recordings in order to leave only the best parts and later cut out therest. Remember that when you divide scenes in the playlist, you do not affect your originalrecordings allowing you to easily try out different “director cuts”.Available only with DVD-RW discs recorded in VR mode.Dividing Scenes1. Set the camcorder to play movies ( ).2. From the index screen, select ( , ) the scene you want to divideand press the FUNC. button.3. Select ( ) the (DIVIDE) icon and press ( ).• The scene will be played back.• You can also press the FUNC. button while playing back a scene.4. At the place where you want to divide the scene, press the /button to pause the playback.5. If necessary, in order to bring the scene to a precise point select ( )the / icon and press ( ) to respectively, reverse or advance oneframe at a time.If you want to select a different scene, select the / icon and press ( ) to skipto the next or previous scene. Press the / button to resume normal playback andreturn to step 4 above.6. Select ( ) the icon and press ( ).7. Select [YES] and press ( ) to divide the scene.The second part of the scene (starting from the dividing point) will be added as aseparate scene immediately after the original one.To Divide a Scene only in the PlaylistAfter Step 1 above, press the PLAYLIST button to open the playlist index screen andcontinue the procedure as described. Photomovie scenes and scenes created by converting single still imagescannot be divided. Scenes shorter than 5 seconds cannot be divided.
