101Objects in the foreground and background will be in focus automatically.All the AF points will function to detect the subject, and the aperturerequired to attain the necessary depth of field will be set automatically.* <8> stands for Auto-Depth of field. This mode sets the depth of fieldautomatically.1 Set the Mode Dial to <8>.2 Focus the subject.Aim the AF points over the subjectsand press the shutter button halfway(0).All the subjects covered by the AFpoints flashing in red will be in focus.If focus is not achieved, the picturecannot be taken.3 Take the picture.The aperture display in the viewfinder blinks.The exposure is correct, but the desired depth of field cannot beobtained. Either use a wide-angle lens or move farther away fromthe subjects.The shutter speed display in the viewfinder blinks.If the “30"” shutter speed blinks, it means that the subject is too dark.Increase the ISO speed. If the “4000” shutter speed blinks, it meansthat the subject is too bright. Decrease the ISO speed.A slow shutter speed has been set.Use a tripod to steady the camera.I want to use flash.Flash can be used, however, the result will be the same as using the<d> mode with flash. The desired depth of field will not be obtained.8: Automatic Depth-of-Field AEFAQwww.devicemanuals.euAim the AF points over the subjectswww.devicemanuals.euAim the AF points over the subjectsand press the shutter button halfwaywww.devicemanuals.euand press the shutter button halfwayAll the subjects covered by the AFwww.devicemanuals.euAll the subjects covered by the AFpoints flashing in red will be in focus.www.devicemanuals.eupoints flashing in red will be in focus.If focus is not achieved, the picturewww.devicemanuals.euIf focus is not achieved, the picturecannot be taken.www.devicemanuals.eucannot be taken.3www.devicemanuals.eu3 Take the picture.www.devicemanuals.euTake the picture.www.devicemanuals.euThe aperture display in the viewfinder blinks.www.devicemanuals.euThe aperture display in the viewfinder blinks.The exposure is correct, but the desired depth of field cannot bewww.devicemanuals.euThe exposure is correct, but the desired depth of field cannot bewww.devicemanuals.euobtained. Either use a wide-angle lenswww.devicemanuals.euobtained. Either use a wide-angle lens
