28Load a fully charged Battery Pack LP-E8 into the camera.1 Open the cover.Slide the lever as shown by thearrows and open the cover.2 Insert the battery.Insert the end with the batterycontacts.Insert the battery until it locks inplace.3 Close the cover.Press the cover until it snaps shut.Open the cover and remove thebattery.Press the battery release lever as shownby the arrow and remove the battery.To prevent short circuiting of thebattery contacts, be sure to attach theprotective cover (provided, p.26) tothe battery.Installing and Removing the BatteryInstalling the BatteryRemoving the BatteryAfter opening the battery compartment cover, be careful not to swing it backfurther. Otherwise, the hinge might break.www.devicemanuals.euInsert the end with the batterywww.devicemanuals.euInsert the end with the batteryInsert the battery until it locks inwww.devicemanuals.euInsert the battery until it locks inClose the cover.www.devicemanuals.euClose the cover.Press the cover until it snaps shut.www.devicemanuals.euPress the cover until it snaps shut.www.devicemanuals.euwww.devicemanuals.euwww.devicemanuals.euwww.devicemanuals.euRemoving the Batterywww.devicemanuals.euRemoving the Batterywww.devicemanuals.euwww.devicemanuals.euwww.devicemanuals.eu
