85In Basic Zone modes, the camera will normally focus the closest subjectautomatically. Therefore, it might not always focus your target subject.In the <d>, <s>, <f>, and <a> modes, you can select the AFpoint and use it to focus the target subject.1 Press the <S> button. (9)X The selected AF point will bedisplayed on the LCD monitor and inthe viewfinder.2 Select the AF point.Press the <S> key to select the AFpoint.While looking at the viewfinder, youcan select the AF point by turning the<6> dial until the desired AF pointlights in red.When all the AF points light up,automatic AF point selection will beset. The AF point will be selectedautomatically to focus the subject.Pressing <0> toggles the AF pointselection between the center AF pointand automatic AF point selection.3 Focus the subject.Aim the selected AF point over thesubject and press the shutter buttonhalfway to focus.S Selecting the AF Point Nwww.devicemanuals.euSelect the AF point.www.devicemanuals.euSelect the AF point.Press the <www.devicemanuals.euPress the <Swww.devicemanuals.euS> key to select the AFwww.devicemanuals.eu> key to select the AFWhile looking at the viewfinder, youwww.devicemanuals.euWhile looking at the viewfinder, youcan select the AF point by turning thewww.devicemanuals.eucan select the AF point by turning the<www.devicemanuals.eu<6www.devicemanuals.eu6> dial until the desired AF pointwww.devicemanuals.eu> dial until the desired AF pointlights in red.www.devicemanuals.eulights in red.www.devicemanuals.euWhen all the AF points light up,www.devicemanuals.euWhen all the AF points light up,www.devicemanuals.euwww.devicemanuals.eu
