75d: Program AEChange the ISO speed or use the built-in flash.To match the subject and ambient lighting level, you can change theISO speed (p.79) or use the built-in flash (p.90). In the <d> mode,the built-in flash will not fire automatically. So under low light, pressthe <I> (Flash) button to raise the built-in flash.The program can be shifted. (Program shift)After pressing the shutter button halfway, turn the <6> dial tochange the shutter speed and aperture setting combination(program). Program shift is canceled automatically after the pictureis taken. Program shift is not possible with flash.Shooting TipsIf the “30"” shutter speed and the maximum apertureblink, it indicates underexposure. Increase the ISOspeed or use flash.If the “4000” shutter speed and the minimum apertureblink, it indicates overexposure. Decrease the ISOspeed.Differences Between <d> and <A> (Scene Intelligent Auto)With <A>, many functions such the AF mode, drive mode, and built-inflash are set automatically to prevent spoiled shots. The functions you canset are limited. With <d>, only the shutter speed and aperture are setautomatically. You can freely set the AF mode, drive mode, built-in flash,and other functions (p.268). www.devicemanuals.euchange the shutter speed and aperture setting combinationwww.devicemanuals.euchange the shutter speed and aperture setting combinationed automatically after the picturewww.devicemanuals.eued automatically after the picturenot possible with flash.www.devicemanuals.eunot possible with flash.www.devicemanuals.euwww.devicemanuals.eu
