166You can prevent the beeper from sounding when focus is achieved orduring self-timer operation.Under the [1] tab, select [Beep], thenpress <0>. Select [Disable], thenpress <0>.This prevents shooting if there is no card in the camera.Under the [1] tab, select [Releaseshutter without card], then press<0>. Select [Disable], then press<0>.If there is no card installed and you pressthe shutter button, “Card” will bedisplayed in the viewfinder, and youcannot release the shutter.You can set how long the image is displayed on the LCD monitorimmediately after capture. If [Off] is set, the image will not be displayedimmediately after image capture. If [Hold] is set, the image review willbe displayed up until the [Auto power off] time.During image review, if you operate any camera controls such aspressing the shutter button halfway, the image review will end.Under the [1] tab, select [Imagereview], then press <0>. Select thedesired setting, then press <0>.Handy Features3 Silencing the Beeper3 Card Reminder3 Setting the Image Review Timewww.devicemanuals.euThis prevents shooting if there is no card in the camera.www.devicemanuals.euThis prevents shooting if there is no card in the camera.] tab, select [www.devicemanuals.eu] tab, select [shutter without cardwww.devicemanuals.eushutter without card>. Select [www.devicemanuals.eu>. Select [Disablewww.devicemanuals.euDisableIf there is no card installed and you presswww.devicemanuals.euIf there is no card installed and you pressthe shutter button, “www.devicemanuals.euthe shutter button, “displayed in the viewfinder, and youwww.devicemanuals.eudisplayed in the viewfinder, and youcannot release the shutter.www.devicemanuals.eucannot release the shutter.www.devicemanuals.euwww.devicemanuals.euYou can set how long the image is displayed on the LCD monitorwww.devicemanuals.euYou can set how long the image is displayed on the LCD monitorimmediately after capture. If [www.devicemanuals.euimmediately after capture. If [www.devicemanuals.euSetting the Image Review Timewww.devicemanuals.euSetting the Image Review Time
