2523 Custom Function SettingsNC.Fn I: ExposureC.Fn I -1 Exposure level increments0: 1/3-stop1: 1/2-stopSets 1/2-stop increments for the shutter speed, aperture, exposurecompensation, AEB, flash exposure compensation, etc. Effective whenyou prefer to control the exposure in less fine increments than 1/3-stopincrements.C.Fn I -2 ISO speed setting increments0: 1/3-stop1: 1-stopC.Fn I -3 ISO expansion0: Off1: OnFor the ISO speed, “H” (equivalent to ISO 12800) will be selectable.Note that if [8C.Fn II -3: Highlight tone priority] is set to [1: Enable],“H” (equivalent to ISO 12800) cannot be set.C.Fn I -4 Bracketing auto cancel0: OnThe AEB and WB-BKT settings will be canceled if you set the powerswitch to <2>, clear the camera settings, or switch to the moviemode. AEB will also be canceled when the flash is ready to fire.1: OffThe AEB and WB-BKT settings will not be canceled even if you set thepower switch to <2>. (If the flash is ready to fire, AEB will becanceled temporarily, but the AEB amount will be retained.)With setting 1, the exposure level will be displayed in the viewfinder and onthe LCD panel as shown below.
