873 Setting the Image-recording QualityThe maximum burst during continuous shooting indicated on page 85 isthe number of continuous shots that can be taken without stopping,based on a formatted 4GB card.The number is displayed on the bottomright in the viewfinder. If the maximumburst is 99 or higher, “99” will bedisplayed.Maximum Burst During Continuous Shooting The maximum burst is displayed even when a card is not inserted in thecamera. Make sure that a card is loaded before taking a picture. If [8C.Fn II -2: High ISO speed noise reduction] is set to [2: Strong],the maximum burst will be greatly reduced (p.254).If the viewfinder displays “99” for the maximum burst, it means the maximumburst is 99 or higher. If the maximum burst decreases to 98 or lower and theinternal buffer memory becomes full, “buSY” will be displayed in theviewfinder and on the LCD panel. Shooting will then be disabled temporarily.If you stop the continuous shooting, the maximum burst will increase. Afterall the captured images are written to the card, the maximum burst will be aslisted on page 85.
