96White balance (WB) is for making the white areas look white. Normally,the <Q> (Auto) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with <Q>, you can select the whitebalance to match the light source or set it manually by shooting a whiteobject.1 Select [White balance]. Under the [2] tab, select [Whitebalance], then press <0>.2 Select the white balance. Select the white balance, then press<0>.* Applicable with Speedlites having a color temperature transmission function.Otherwise, it will be set to approx. 6000K.To the human eye, a white object looks white regardless of the type oflighting. With a digital camera, the color temperature is adjusted withsoftware to make the white areas look white. This adjustment serves asthe basis for the color correction. The result is natural-looking colors inthe pictures.3 Setting the White BalanceNDisplay Mode Color Temperature (Approx. K: Kelvin)Q Auto 3000 - 7000W Daylight 5200E Shade 7000R Cloudy, twilight, sunset 6000Y Tungsten light 3200U White fluorescent light 4000I Flash use Automatically set*O Custom (p.97) 2000 - 10000P Color temperature (p.98) 2500 - 10000About White Balance
