2 Simple Picture Taking45Check the Image ImmediatelyChecking the Image After it is TakenYou can set the camera to display each image on the LCD monitor as soon as it is taken. Youcan do this two ways: Select [On] to display the image by itself, or select [On (Info)](104) todisplay the image with its recording information. Select [Off] if you do not want to display theimage. The default setting is [On].1 From the Menu, select [Review]. Press the 〈MENU〉 button. Turn the 〈 〉 dial to select [Review], thenpress the 〈 〉 button.2 Select the Review setting. Turn the 〈 〉 dial to select the desiredoption, then press the 〈 〉 button.The setting is entered, and the displayreturns to the menu. Press the 〈MENU〉 button to clear thescreen and exit the menu.3 Take the picture.After the picture is taken, the image as itwas shot appears on the LCD monitor.The time that image is displayed dependson the review time setting. (46) The display differs depending on whetheryou selected [On] or [On (Info)].You can change the review time setting. (46)[On] selected [On (Info)] selected (104)Histogram(104)Date/time(38)Imageinformation(104)
