82Autoexposure BracketingWhen using autoexposure bracketing, the camera automatically changes the exposure levelwithin the set range (up to ±2 stops in 1/2-stop increments) for three successive frames. This iscalled AEB (Auto Exposure Bracketing). The three bracketed shots are exposed in the selecteddrive mode (67) in the following order: correct exposure, underexposure, and overexposure.1 From the menu, select [AEB]. Press the 〈MENU〉 button. Turn the 〈 〉 dial to select [AEB], thenpress the 〈 〉 button.2 Set the AEB level. Turn the 〈 〉 dial to set the AEB level youwant, then press the 〈 〉 button. The AEB setting is entered, and the displayreturns to the Menu. Press the 〈MENU〉 button to clear thescreen and exit the menu.3 Take the picture. When using continuous shooting, pressand hold the shutter button down fully totake all three bracketed shots continuously,and then stop automatically. When using AEB with the self-timer, thecamera takes the three bracketed shots insuccession after the 10-second timer delay.Canceling AEB Follow steps 1 and 2 to set the AEB level to〈 〉. AEB will be automatically canceled whenthe Main Switch is set to [OFF], the lens ischanged, the flash completes charging,the Auto power off time is reached, or the〈MENU〉 button or the 〈 〉 button ispressed.:Correct exposure:Underexposure:OverexposureCorrect exposure (0) Underexposure (-1.0) Overexposure (+1.0)
