70Custom white balance lets you set the white balance yourself by photographing a white subjectto use as the basis for the camera’s white balance, and then selecting that picture for use aswhite balance data.1 Photograph a white subject. Take a picture of a white subject, just asyou would take a normal picture. Frame the shot so that the white subjectfills the entire partial metering zone in theviewfinder. This picture can be taken using any mode(20).2 From the menu, select [CustomWB]. Press the 〈MENU〉 button. Turn the 〈 〉 dial to select [Custom WB],then press the 〈 〉 button.3 Select the image. Turn the 〈 〉 dial to select the picture youtook in step 1, then press the 〈 〉 button. When the setting is entered, the screenreturns to the menu. Press the 〈MENU〉 button to clear thescreen and exit the menu.4 Press the 〈 〉 button. ( )6AFWBCustom White Balance SettingPartial metering zone
