Handy Features134Vertical images are rotated automatically so theyare displayed vertically on the camera’s LCDmonitor and computer instead of horizontally. Thesetting of this feature can be changed.Under the [5] tab, select [Auto rotate],then press <0>. The available settingsare described below. Select one, thenpress <0>.[OnPD] : The vertical image is automatically rotated during playbackon both the camera’s LCD monitor and on the computer.[OnD] : The vertical image is automatically rotated only on thecomputer.[Off] : The vertical image is not automatically rotated at all.The vertical image is not rotated during the image reviewimmediately after it is captured.Press the <x> button and the image playback will display the rotated image.[OnPD] is set, but the image does not rotate during playback.Auto rotate will not work with vertical images captured while [Autorotate] was set to [Off]. Also, if the vertical image is taken while thecamera is pointed up or down, the image might not rotate forplayback. In such a case, see “Rotating the Image” on page 151.On the camera’s LCD monitor, I want to rotate an imagecaptured when [OnD] had been set.Set [OnPD], then playback the image. It will be rotated.The vertical image does not rotate on the computer screen.The software used is not compatible with image rotation. Use thecamera’s provided software instead.3 Auto Rotate of Vertical ImagesFAQCOPY
