3 Appending Dust Delete DataN1443 Photograph a solid-white object.At a distance of 20 cm - 30 cm / 0.7 ft. - 1.0ft., fill the viewfinder with a patternless,solid-white object and take a picture.X The picture will be taken in the aperture-priority AE mode with an aperture of f/22.Since the image will not be saved, thedata can still be obtained even if thereis no card in the camera.X When the picture is taken, the camerawill start obtaining the Dust DeleteData. When the Dust Delete Data isobtained, a message will appear.Select [OK], and the menu willreappear.If the data was not obtainedsuccessfully, a message to that effectwill appear. Follow the “Preparation”procedure on the preceding page, thenselect [OK]. Take the picture again.After the Dust Delete Data is obtained, it is appended to all the JPEGand RAW images captured thereafter. Before an important shoot, youshould update the Dust Delete Data by obtaining it again.To erase dust spots automatically with the provided software, see theSoftware Instruction Manual in the CD-ROM.The Dust Delete Data appended to the image is so small that it hardlyaffects the image file size.About the Dust Delete DataBe sure to use a solid-white object such as a new sheet of white paper. If thepaper has any pattern or design, it may be recognized as dust data andaffect the accuracy of the dust deletion with the software.COPY
