209If there is a problem with the camera, anerror message will appear. Follow the on-screen instructions.* If the error still persists, write down the error No. and contact your nearestCanon Service Center.Error CodesNo. Error Message & Solution01Communications between the camera and lens is faulty. Clean thelens contacts.Î Clean the electrical contacts on the camera and lens and use aCanon lens. (p.13, 16)02Card cannot be accessed. Reinsert/change card or format cardwith camera.Î Remove and install the card again, replace the card, or format thecard (p.31, 40).04Cannot save images because card is full. Replace card.Î Replace the card, erase unnecessary images, or format the card(p.31, 159, 40).05The built-in flash could not be raised. Turn the camera off and onagain.Î Power switch operation (p.27).06 Sensor cleaning is not possible. Turn the camera off and on again.Î Power switch operation (p.27).10, 20,30, 40,50, 60,70, 80Shooting is not possible due to an error. Turn the camera off andon again.Î Operate the power switch, remove and install the battery again, oruse a Canon lens (p.27, 26).Error No.CountermeasuresCOPY
