Canon FAX-JX300 User Manual

Also see for FAX JX200: Manual Easy Setup instructions User guide User guide Service manual

Contents

17CopyingCopyingMaking CopiesOne of the convenient features of the fax is its ability to make high quality copies. You can make upto 99 copies of one document at a time.If you make copies of multiple documents at a time, the number of pages the fax can scan intomemory is as follows:1 Load the document face up into the Document Tray.See “Loading Documents and Paper” on page 15.2 Press [Start/Copy]. The LCD displays .3 Press [Receive Mode/Resolution].You can select , , or .4 Enter the number of copies (up to 99) using the numeric buttons, then press [Start/Copy].To make a correction to the number of copies, press [Clear] and re-enter the number.To stop copying anytime, press [Stop]. If the document does not eject, press [Start/Copy] for afew seconds, then the fax will feed out the document. See “Jams in the Document Tray” onpage 65.z COPY STANDARD/COPY FINE/COPY DRAFT = 10 pagesNotez The number of pages the fax can scan into memory is not affected by the scanning resolutions (seepage 19).z and result in the same resolution when making copies.z If MEMORY FULL appears on the LCD when making multiple copies, see “Copying Problems” onpage 70.NoteIf paper jams, see “Troubleshooting” on page 65.