| 
42 Using TAM Mode (FAX-JX500/JX300 only)Remote Control FeaturesUse these features when you call home to play back any messages you may have received. You canalso use the remote control features to set .You must register a four-digit PIN as your password before you can use these features. Registering the Password for Remote Control1 Press [Menu].2 Use [{] or [}] to select , then press [Start/Copy]. TheLCD displays .3 Use [{] or [}] to select , then press [Start/Copy]. The LCDdisplays .4 Use [{] or [}] to select , then press [Start/Copy]. The LCDdisplays .*The default setting is 1234.5 Use the numeric buttons to enter a four-digit PIN as your password, then press[Start/Copy].6 Press [Stop].Registration ends and the fax returns to standby mode. Using Remote Control1 Call home.2 The outgoing message will be played.3 Press [#] while the outgoing message is playing. Enter your password when youhear the beeps indicating that you should enter your password.When your password is accepted, you will hear a confirmation tone (a short seriesof beeps).4 The fax will now accept remote control commands (see “List of Remote ControlCommands” on page 44).For example, press [1][1][#] to play back any telephone messages you may have received.When playback has finished, press [9][9][#] to end the remote control.5 End the remote control and hang up the Handset. |
