| 
485 Press [▲] or [▼] to highlight , and then press [OK].Delayed TX01/01/2011 12:52AMOffOn6 Enter the time at which you want to send the document, and then press[OK].7 Specify a destination (→p.44).8 Press [ ] (Start).• Your fax is sent at the specified time.Sending a Fax to an International Destination(Adding Pauses)When sending faxes to international destinations, it is sometimes difficult to connect to arecipient, due to the long distance that the signal must travel. You can insert a pause afterthe international access code to reduce this problem.1 Place documents (→p.16).2 Switch to the Fax Mode (→p.13).3 Use the alphanumeric keys to enter the international access code.• For details about international access codes, contact your telephone service provider.4 Press [ ] (Pause) to enter a pause.• The letter <P>is displayed to indicate the pause.• The default pause added before the number is two seconds. To change the pausetime, see “” (→p.57).• To add another pause, press [ ] (Pause) again.5 Use the alphanumeric keys to enter the country code, area code, and faxnumber.6 Press [ ] (Pause), and then press [OK].• A pause added to the end of the number is fixed at 10 seconds.7 Press [ ] (Start). |
