Canon FAXPHONE L100 Basic Operation Manual

Also see for FAXPHONE L100: Service manual Starter Guide Technical information

Contents

80Error Code Cause Action#099 A user canceled a job that isprocessing to be sent or received. Try to send or receive the document again.#995A document waiting to be sent orreceived has been canceled by auser.Try to send or receive the document again.Improve Output QualityFollow the recommended actions for each symptom to improve the output quality.If you cannot solve the problem with the following actions, see[Troubleshooting] in the e-Manual.Symptom Example ActionPaper curls• Verify that the appropriate paper is being used (→p.18).• Print a test page with new paper.• Verify that the paper is loaded properly (→p.18).Paper creases• Verify that the appropriate paper is being used (→p.18).• Print a test page with new paper.• Verify that the paper is loaded properly (→p.18).• Remove any foreign objects inside the machine.• Change the <Special Mode D> setting from the operation panel.Printing is uneven• Verify that the appropriate paper is being used (→p.18).• Print a test page with new paper.• Verify that the paper is loaded properly (→p.18).• Check the toner level (→p.67).White specks appear• Verify that the appropriate paper is being used (→p.18).• Print a test page with new paper.• Check the toner level (→p.67).• If printing high-contrast documents from a computer, open theprinter driver and select [Finishing]  [Advanced Settings] [Special Print Mode]  [Special Settings 2] to adjust the density.The toner adheres tothe hand• Verify that the appropriate paper is being used (→p.18).• Print a test page with new paper.The printed paper hasvertical streaks• Verify that the appropriate paper is being used (→p.18).• Print a test page with new paper.• If the machine is not in use for a long after the toner cartridge hasbeen replaced, change the <Special Mode C> settings from theoperation panel.• When printing received faxes or reports, change the <SpecialMode B> settings from the operation panel.• When printing, change the [Special Print Adjustment] settingsfrom the printer driver.