COPYRIGHT © 1998 CANON INC. CANON DADF-A1 REV.0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON) 3-7CHAPTER 3 MECHANICAL SYSTEM4) Remove the two screws [4], anddisconnect the connector [3] of the feedermotor clock sensor S9.[3][4] [4]Figure 3-2055) Detach the two drive belts [5], and detachthe feeder motor unit [6].[5][6]Figure 3-206C. Belt Motor1. Removing the Belt Motor1) Remove the DADF from the copier.2) Remove the feeder motor unit.3) Remove the tie-wrap as necessary.4) Disconnect the connectors J6 [1], J7 [3],and J13 [3] of the DADF controller PCB.[3] [1] [2]Figure 3-2075) Disconnect the connector [4] of the beltmotor clock sensor (S10).[4]Figure 3-208