CHAPTER 3 MECHANICAL SYSTEM3-12 COPYRIGHT © 1998 CANON INC. CANON DADF-A1 REV.0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)B. Removing the SeparationBelt Unit1) Remove the body cover.2) Detach the reversing roller drive belt [1].[1]Figure 3-3053) Remove the two screws [2], and detach theseparation belt unit [3] together with thefixing plate [4].[3] [2] [4] [2]Figure 3-306C. Feeding Roller Unit1) Remove the body cover.2) Remove the original tray mount.3) Remove the original inlet guide plate.4) Remove the separation belt unit.5) Remove the four screws [5], and detachthe separation guide plate [6].[5] [6] [5]Figure 3-3076) Remove the two screws [8], and detach theinside guide plate [7].[8] [7] [8]Figure 3-308