Canon HR10 Instruction Manual

Also see for 2075B001: Brochure

Contents

Pressing _ willnot start Setthe camcorder to _; mode. 35recording. Load a recommended disc.The disc isfull (" _, END" appears on the screen). Delete some recordings 43(DVD-RW in HD quality, or SD quality (VRmode)) to free some space orreplace the disc.The camcorder has exceeded its operational temperature. Turn off thecamcorder and let it cool down before resuming use,Remove the disc protection. 66Unfinalize the disc (DVD-RW in HD quality, or SD quality (VIDEO mode)). 71Even after stopping recording, the The scene is being recorded on the disc. This is not a malfunction. 35DISC access indicator does not go off,The point where _ was There isa slight interval between pressing _ and the actual startpressed does not match the of recording on the disc. This is not a malfunction.beginning/end of the recording.The recording suddenly stops shortly The disc is dirty. Clean the disc with a soft lens-cleaning cloth. If the 111after starting recording, problem persists replace the disc.The camcorder has exceeded its operational temperature. Turn off thecamcorder and let it cool down before resuming use,Camcorder will not focus. Autofocus does not work on the subject. Focus manually. 59Adjust the viewfinder with the dioptric adjustment lever. 36Lens is dirty. Clean the lens with a soft lens-cleaning cloth. Never use 113tissue paper to clean the lens.Sound is distorted. When recording near loud sounds (such as fireworks or concerts), soundmay become distorted. This is not a malfunction.Viewfinder picture is blurred. Adjust the viewfinder with the dioptric adjustment lever. 36Playback/EditingPressing the playback button does Load a disc. 32not start playback. Set the camcorder to _ mode. 41Do not insert into the camcorder discs that were initialized, recorded oredited using another DVD device.If using a single-sided disc, check that the disc is inserted with the label 32side facing up,The camcorder has exceeded its operational temperature. Turn off thecamcorder and let it cool down before resuming use,• During playback there is video The disc is dirty. Clean the disc with a soft lens-cleaning cloth. 111noise and the sound is distorted. Do not insert into the camcorder discs that were initialized, recorded or• The disc cannot be read. edited using another DVD device.103