Canon HR10 Instruction Manual

Also see for 2075B001: Brochure

Contents

....There is no sound from the TV, When connecting the camcorder to an HDTV using the CTC-lOO/S 93Component Cable, make sure to connect also the audio connections usingthe white and red plugs of the STV-IO0 Stereo Video Cable.Disconnect the HDMI cable and then restore the connection or turn thecamcorder off and then on again.The camcorder is connected usingthe HDMI cable, but there is nopicture or sound from the HDTV,The disc cannot be recognized by thedevice, Or, even though the disc isread, cannot play backthe disc orthepicture is distorted.The disc is dirty, Clean the disc with a soft lens-cleaning cloth.Finalize the disc,DVD-RW discs recorded in SD quality (VRmode) can only be played backwith VR mode-compatible DVD players. Refer to the instruction manual ofour DVD device,Discs recorded in HD quality can only be played back with AVCHD-compatible DVD players, Refer to the instruction manual of your DVDdevice,Cannot edit my recordings or add It may not be possible to edit or add recordings with an external DVDrecordings to the disc with the DVD recorder on a disc recorded with this camcorder,device.When writing on a disc in this The camcorder has exceeded its operational temperature, Turn off thecamcorder recordings transferred camcorder and let it cool down before resuming use.from a computer, an error messageappears,11168Memory Card OperationMemory card cannot be inserted. Memory card was not facing the correct direction. Turn the memory cardover and insert it.Cannot record on the memory card. Memory card is full. Erase still images to free some space or replace thememory card.Memory card was not initialized. Initialize the memory card.The folder and file numbers have reached their maximum value. Set[FILE NOS.] to [RESET] and insert a new memory card.Still images cannot be captured from the playback scene when [IV TYPE]is set to [NORMAL TV].Memory card cannot be played back, Insert a memory card,Set the camcorder to {P mode,Image cannot be erased, Image is protected, Cancel the protection,[_ appears in red. A memory card error occurred, Turn off the camcorder, Remove andreinsert the memory card and set the camcorder back to (_ _tmode, If @ still appears in red, initialize the memory card,iiiiili: i ii iiiil347784535334758384105