G-2GGlossaryCollateTo print multiple copies of a multi-page document in sequential page order.CommandAn instruction that tells the printer to perform a certain function. Commands are sent from thecomputer to the printer via the interface cable when the printer is ready.ContrastThe degree of difference between the lightest and darkest areas of an image. Decreasingcontrast lightens the dark areas and darkens the light areas; increasing it darkens the dark areasand lightens the light areas.Control PanelsThe set of Windows programs you can use to change system, hardware, software, andWindows settings.DDDDDefault settingA setting that is automatically used if no other setting is specified.DesktopThe entire Windows screen that represents your work area in Windows. Icons, windows, andthe taskbar are displayed on the Windows desktop.dpiDots per inch. A unit of measurement for indicating a printer’s resolution. The imageCLASSD700 series prints at a resolution of 600 dpi.DriverA program that controls how the computer and an external device interact. The printer driversupplies Windows with information such as descriptions of the fonts and features of theinstalled printer. When you print with the Canon Advanced Printing Technology, you areusing its printer driver.EEEEECPAbbreviation for Extended Capabilities Port. A bi-directional communication mode thatenables high-speed data transmission to printers and other devices.FFFFFixing assemblyThe device used during the print process to fix the toner onto the paper (or other media)through applying heat and pressure. The assembly, located inside the printer, gets extremelyhot (374°F/190°C) during operation.iR1210G_iR1230G.book Page 2 Tuesday, June 24, 2003 2:22 PM