5-25TroubleshootingPrinter ProblemsPrinter ProblemsPrinter ProblemsPrinter ProblemsProblem Cause SolutionPrinter does notprintPaper might not be loaded. Make sure paper is loaded.A copy job might not havebeen completed due to theOut of Paper status.The print job will start automaticallywhen the copy job is completed. Please,load paper.Print jobs might be stalled. Check the Canon PC1200/iC D700 StatusWindow for stalled jobs.The cartridge might not beinstalled correctly.Check that the cartridge is installedcorrectly. Set-up InstructionsYour BIOS port settingmight need to be modified.See your computer’s documentationconcerning available ports.The parallel cable might notbe compatible.Make sure you are using an 8-bit,Centronics-compatible, parallel interfacecable with bi-directional capability.Your computer might not beworking properly.Check your computer, make sure it isturned on and working properly.No power issuppliedPower cord might not beplugged in.Make sure the power cord is securelyplugged into both the machine and theAC outlet.AC outlet might not besupplying power.Make sure the AC outlet is supplyingpower; try another outlet if necessary.AC voltage might not matchprinter.Make sure the voltage of the AC outletmatches the ratings on the printer.Printer stopsprintingYour interface cable might beloose.Check your computer and your cable.Printer stopsprintingYou might be working on anapplication in the foreground,in which case printingperformance might slow down.Printer performance improves if you giveyour print job priority.iR1210G_iR1230G.book Page 2 Tuesday, June 24, 2003 2:22 PM