Canon ImageRUNNER 2422L User Manual

Contents

Setting Up the Connection1-20Before You Start Using This Machine1• If the machine is connected to a computer via the USB cable, you will not be able to usecertain utilities.• If you connect the machine to a computer via a USB cable, make sure that Device> (in the System Settings screen) is set to ‘On’. (See Chapter 4, “System ManagerSettings,” in the Reference Guide.)NOTE• If the machine is connected to a computer with a USB cable, you can print a documentfrom your computer using the printer driver.• With a USB connection, you cannot use the Remote UI and the Network Scan function.• The appropriate USB interface for Windows 2000/XP/Vista/7/Server 2003/Server 2008 isUSB 2.0 Hi-Speed/USB Full-Speed (USB 1.1 equivalent). For Mac OS X 10.3.2 or earlieris USB Full-Speed (USB 1.1 equivalent) and Mac OS X 10.3.3 or later is USB 2.0Hi-Speed/USB Full-Speed (USB 1.1 equivalent). For more information, consult your localauthorized Canon dealer.Connecting to a NetworkThe machine can connect to a TCP/IP network. The machine supports both10BASE-T and 100BASE-TX connections that can be used in most LANs.Using EthernetConnect the machine’s RJ-45 port to a hub port using the following types of cabledepending on your network environment:- When connecting to a computer with 100Base-TX connector: a Category 5 (orhigher) twisted pair LAN cable- When connecting to a computer with 10Base-T connector: a Category 3 (orhigher) twisted pair LAN cableCAUTIONWhen connecting the interface cable or network cable, be sure to observe thefollowing precautions in order to avoid electric shock.- Turn OFF the main power switch before disconnecting the power cord from thepower outlet. (See Chapter 1, “Before You Start Using This Machine,” in theReference Guide.)- Turn OFF the computer and disconnect the power cord from the power outlet.