Canon ImageRUNNER 2422L User Manual

Contents

Paper Drawers 3-5Routine Maintenance3IMPORTANT• Rolled or curled paper must be straightened out prior to use.• Make sure that the height of the paper stack does not exceed the loading limit mark ( )at the back of the paper drawer and the corners are below the paper size guide clips.• Make sure that the paper-size detecting lever is set correctly. If the lever is set on a wrongposition, paper jams or dirty prints may occur, or the inside of the machine may get dirty.NOTE• Each paper drawer holds about 250 sheets of paper (80 g/m2 ).• If there are instructions on the package of paper about which side of the paper to load,follow those instructions.• When the paper is loaded into the paper drawer, the side facing up is the one printed on.• If problems occur, such as poor print quality or paper jams, try turning the paper stackover, and reload it.• For more information on the print direction of preprinted paper (paper which has logos orpatterns already printed on it), see Chapter 8, “Appendix,” in the Reference Guide.IMPORTANTYou will not be able to make copies or prints if you load paper that exceeds the loadinglimit, or if the paper drawer is not completely pushed into the machine. Always check thatthe paper drawers are in place, and that the paper does not exceed the loading limit.NOTEIf paper runs out during copying or printing, load a new paper stack, and follow theinstructions on the LCD display. The machine automatically restarts, and produces theremaining copies or prints.5 Gently push the paper drawerback into the machine until itclicks into space in the closedposition.CAUTIONWhen returning the paper drawer toits original position, be careful not toget your fingers caught, as this mayresult in personal injury.