Canon ImageRUNNER 2422L User Manual

Contents

Basic Copying2-16Basic Operations2NOTE• You will not be asked for the size of the original in the following cases:- The paper size set for a specific paper source has been selected manually. (SeeChapter 1, “Basic Operations,” in the Copying Guide.)- The Image Combination function is set. (See Chapter 2, “Advanced Operations,” in theCopying Guide.)- Either or is set. (See Chapter 2, “AdvancedOperations,” in the Copying Guide.)• If there is a current job, the machine scans the original and waits to print it. Printing startswhen the current job is complete.• You can specify copy settings and scan originals while the machine is in the waiting state,such as when the machine has just been turned ON, after a paper jam is cleared, or aftera cover on the main unit or an optional unit is closed. Copying automatically begins assoon as the machine is ready.• If the message appears on the LCD display, divide your originals intoseveral sets and copy them separately.7 If you want to start copying the next original while printing for thecurrent job is in progress, repeat steps 3 to 6.IMPORTANTYou cannot reserve a copy job when paper is jammed or loaded in none of the paperdrawers or stack bypass.NOTE• You can reserve up to five copy jobs, including the current job.• You can set different copy modes and paper sources, including the stack bypass, foreach reserved job. For instructions on using the stack bypass, see Chapter 2, “BasicOperations,” in the Reference Guide.8 When copying is complete, remove your originals.9 If Department ID Management or User ID Management is set, press(ID).NOTE• For instructions on using Department ID Management, see Chapter 4, “System ManagerSettings,” in the Reference Guide.• For instructions on using User ID Management, see Chapter 3, “Customizing Settings,” inthe Remote UI Guide.