Canon ImageRUNNER 2422L User Manual

Contents

Placing Originals2-10Basic Operations2Feeder (DADF-P2) (Optional)You should use the feeder when you want to copy several originals at a time. Withthe feeder, the machine automatically feeds the originals to the scanning area andscans them. If you are copying in the 2-Sided mode, two-sided originals can also beautomatically turned over and scanned as two-sided documents.You can place the following originals into the feeder’s original supply tray:• Weight:- 52 g/m 2 to 105 g/m 2 (37 g/m2 to 52 g/m 2 and 106 g/m 2 to 128 g/m 2 whenscanning a single page document)• Size:- A4, A4R, A3, A5, A5R, B4, B5, and B5R• Tray capacity:- A4, A4R, A5, A5R, B5, and B5R: 50 sheets (80 g/m 2)- A3 and B4: 25 sheets (80 g/m 2 )IMPORTANT• Do not place the following types of originals into the feeder:- Originals with tears or large binding holes- Severely curled originals or originals with sharp folds- Clipped or stapled originals- Carbon backed paper or other originals which may not feed smoothly- Transparencies and other highly transparent originals• If the same original is fed through the feeder repeatedly, the original may fold or becomecreased, and make feeding impossible. Limit repeated feeding to a maximum of 30 times.(This number may vary, depending on the type and quality of the original.)• If the feeder rollers are dirty from scanning originals written in pencil, clean the feeder.(See Chapter 6, “Routine Maintenance,” in the Reference Guide.)• Always smooth out any folds in your originals before placing them into the feeder.• Set the originals one by one if they are very thin (37 g/m2 to 52 g/m2) or very thick(106 g/m2 to 128 g/m2).