Parts and Their Functions 1-9Introduction to imageRUNNER 2545 Series1Control Panela Touch panel displayThe menu screen for each function isdisplayed here. (See “Using the Touch PanelDisplay,” on p. 2-2.)b Display Contrast dialTurn clockwise or counterclockwise to adjustthe contrast of the touch panel display.c COPY keyPress to use the Copy function.(See the Copying Guide.)d SEND keyPress to use the Send/Fax function.(See the Sending and Facsimile Guide.)e SCAN/PRINT keyPress to use functions such as RemoteScan, Media Print, Secure Printing, etc. (Seethe Network ScanGear Guide and the PrinterGuide.)f Control panel power switch(Sub power supply)Press to turn the control panel ON or OFF.When the control panel is turned OFF, themachine is in the Sleep mode. (See Chapter2, “Before You Start Using the Machine,” inthe User’s Guide.)g Additional Functions keyPress to access the Additional Functionsmenu. (See “Accessing the AdditionalFunctions Menu,” on p. 2-38.)h Volume Control keyPress to set the machine’s audible tone settings.(See “Volume Control,” on p. 2-30.)i Counter Check keyPress to view the machine’s print/scan page counts.j Stop keyPress to stop a job in progress, such as copying,printing, scanning, etc.k Start keyPress to start an operation.l Main Power indicatorLights up green when the main power is turned ON.m Error indicatorFlashes or lights up red if an error occurs in the machine.n Processing/Data indicatorFlashes or lights up green when the machine isperforming operations.o Clear keyPress to clear entered values or characters.p Log In/Out keyPress to log in to/out of the machine, such as when it ismanaged with Department ID/User ID Management.q Numeric keysPress to enter numbers.r Reset keyPress to cancel all settings and return to the top screen.
