Specifying Common Settings 3-9Configuring the Machine’s Basic Settings3IMPORTANT• [Receive] is displayed only when the Send function (optional for the imageRUNNER2545/2535/2530/2525/2520) is activated.• [Fax] is displayed only when both of the following conditions are met:- The optional Super G3 Fax Board-AG1 is attached.- The Send function is not activated.NOTEYou cannot disable all of the paper drawers at the same time. At least one of the paperdrawers must be enabled.3 Press [Copy], [Printer],[Receive](or [Fax]), or [Other].The screen shot on the left may differ fromthe actual display depending on themachine configuration.[Copy]: Press to select the paper sources used for the copy jobs.[Printer]: Press to select the paper sources used for the print jobs.[Receive](or [Fax]):Press to select the paper sources used for the receiving (RX) jobs(printing received I-faxes or traditional faxes).[Other]: Press to select the paper sources used for printing reports, such asthe Address Book List, User’s Data List, etc.4 Press [On] or [Off] for the stackbypass and the paper drawers ➞press [OK].The available paper sources can beidentified by the following icons:: Stack Bypass: Drawer 1: Drawer 2 (optional for theimageRUNNER 2520i/2520): Drawer 3 (optional): Drawer 4 (optional)[On]: Press to enable the paper source for the selected job type.[Off]: Press to disable the paper source for the selected job type.
