17Before UseBasic GuideAdvanced GuideCamera BasicsAuto Mode /Hybrid Auto ModeOther Shooting ModesP ModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexRemove the memory card.● Push the memory card in until it clicks,and then slowly release it.● The memory card will pop up.Setting the Date and TimeSet the current date and time correctly as follows if the [Date/Time] screenis displayed when you turn the camera on. Information you specify thisway is recorded in image properties when you shoot, and it is used whenyou manage images by shooting date or print images showing the date.You can also add a date stamp to shots, if you wish (= 37).1 Turn the camera on.● Press the power button.● The [Date/Time] screen is displayed.2 Set the date and time.● Press the [ ][ ] buttons to choose anitem.● Press the [ ][ ] buttons to specify thedate and time.● When finished, press the [ ] button.3 Check your card’s write-protectswitch and insert the memory card.● Recording is not possible on memorycards with a write-protect switch when theswitch is in the locked position. Move theswitch toward (1).● Insert the memory card with the terminals(2) facing as shown until it clicks intoplace.● Make sure the memory card is facing theright way when you insert it. Insertingmemory cards facing the wrong way maydamage the camera.4 Close the cover.● Lower the cover (1) and hold it down asyou slide it, until it clicks into the closedposition (2).● For guidelines on how many shots or hours of recording can besaved on one memory card, see “Number of Shots per MemoryCard” (= 151).Removing the Battery Pack and Memory CardRemove the battery pack.● Open the cover and press the batterylock in the direction of the arrow.● The battery pack will pop up.(1)(2)(1)(2)
