73Before UseBasic GuideAdvanced GuidePlayback ModeCamera BasicsAuto Mode /Hybrid Auto ModeOther Shooting ModesP ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexSelecting a Range1 Choose [Select Range].● Following step 2 in “Using the Menu”(= 72), choose [Select Range] andpress the [ ] button.2 Choose a starting image.● Press the [ ] button.● Press the [ ][ ] buttons to choose animage, and then press the [ ] button.3 Choose an ending image.● Press the [ ] button to choose [Lastimage], and then press the [ ] button.● Press the [ ][ ] buttons to choose animage, and then press the [ ] button.● Images before the first image cannot beselected as the last image.Choosing Images Individually1 Choose [Select].● Following step 2 in “Using the Menu”(= 72), choose [Select] and press the[ ] button.2 Choose an image.● Press the [ ][ ] buttons to choose animage, and then press the [ ] button.[ ] is displayed.● To cancel selection, press the [ ] buttonagain. [ ] is no longer displayed.● Repeat this process to specify otherimages.3 Protect the image.● Press the [ ] button. A confirmationmessage is displayed.● Press the [ ][ ] buttons to choose [OK],and then press the [ ] button.● Images will not be protected if you switch to Shooting mode orturn the camera off before finishing the setup process in step 3.
