45Using TAM Mode (JX510P only)ENGLISH Setting Setting allows you to check whether you have any new messages when youcall from a remote location. When is set to and there are new messages,the fax will answer after the second ring. If there are no new messages the fax will ring five timesbefore answering.1 Press [Menu].2 Use [{] or [}] to select , then press [Start/Copy]. TheLCD displays .3 Use [{] or [}] to select , then press [Start/Copy]. The LCDdisplays .4 Use [{] or [}] to select , then press [Start/Copy]. The LCDdisplays .5 Use [{] or [}] to select , then press [Start/Copy].6 Press [Stop/Reset].Setting ends and the fax returns to standby mode.Recording Voice MemosUse this feature when you are going out and want to leave a message for another member of thefamily. Use the Handset on the fax to record your voice memo.Only one voice memo, 60, 120, or 240 seconds*, can be recorded. If you record a new voice memowhen there is already a voice memo recorded, the old voice memo will be deleted.1 Press [Menu].2 Use [{] or [}] to select , then press [Start/Copy].3 Use [{] or [}] to select , then press [Start/Copy].4 Use [{] or [}] to select , then press [Start/Copy]. The LCD displays.5 Pick up the Handset. Press [Start/Copy] and speak into the Handset to record yourvoice memo.The remaining recording seconds is displayed on the LCD.6 Press [Stop/Reset] when recording is finished. The LCD displays HANDSET>.
