| 
46 Using TAM Mode (JX510P only)ENGLISH7 Hang up the Handset and press [Stop/Reset].The fax returns to standby mode.* The recording time for a voice memo can be set to the same settings as the recording timefor a telephone message. However, if you set 0 as the recording time for each telephonemessage, voice memo recording time will be set to 60.Deleting Messages1 Press [Menu].2 Use [{] or [}] to select , then press [Start/Copy].3 Use [{] or [}] to select the type of message you want to delete, then press [Start/Copy]. The LCD displays .4 Use [{] or [}] to select , then press [Start/Copy].5 Press [Stop/Reset].The fax returns to standby mode.Playing Telephone MessagesTelephone messages will be played back in order from the oldest message recorded. If a voicememo has been recorded, it will be played back first.1 Press [Play].The day and time when the telephone message was recorded, the number of telephonemessages and the number of the message being played (ICM No.) are displayed whenever amessage is played.NoteTo play a voice memo, carry out step 1 to 3, select and then press [Start/Copy].NoteYou cannot delete or . An old outgoingmessage or alternative outgoing message will be deleted automatically when you record a newmessage.Notez Press [ ] to listen to the message again. (Repeat)z Press [ ] to play the next message. (Skip)z Press [ ] twice to play the previous message.z Press [Stop/Reset] to stop playback.z Press [Delete] during playback to delete a message.z Use [{] or [}] to change the volume.SUN 17:15 02/05 |
