14-3Summary of SettingsChapter 14Summary of SettingsAccessing the MenusFollow this procedure to access the different menus:1 Open the one-touch speed dial panel.2 Press Data Registration.3 Press Set.4 Use N or M to select the menu you want.• You can select from the following:– USER SETTINGS (1 p. 14-4)– REPORT SETTINGS (1 p. 14-5)– TX SETTINGS (1 p. 14-6)– RX SETTINGS (1 p. 14-7)– PRINTER SETTINGS (1 p. 14-8)– POLLING BOX (1 p. 14-9)– SYSTEM SETTINGS (1 p. 14-10)5 Press Set to access the settings under themenu you selected.6 Refer to the appropriate table (1 followingpages) and use these guidelines to select andregister settings:❏ Use N or M to scroll through thesettings.❏ To register a setting or access sub-settings, press Set.❏ To return to a previous level, press DataRegistration.• For your settings to be registered, besure to press Set after making aselection or entering information.• If at any stage you wish to return tostandby mode, press Stop.• If you pause for more than 60seconds while accessing a menu, theunit will automatically return tostandby mode.7 When you are finished, press Stop to return tostandby mode.DATA REGSTRATIONUSER SETTINGSECM RXEx:15:00 FaxOnlyEx:
