Receiving FaxesChapter 7 Receiving Faxes 7-5HT1-2205-000-V.1.0 LSL User’s GuideSetting the Receive ModeSet the machine receive mode as follows:1. Press Receive Mode.❏ The LCD display shows the current receive mode setting.2. If you want to change the receive mode, press Receive Mode untilthe mode you want appears.3. Press Stop to return to standby mode.Receiving Documents and Telephone Calls Automatically:Fax/Tel ModeSet this mode if you want your machine to automatically switch betweenvoice and fax calls.You can control precisely how your machine handles incoming calls byadjusting the settings described below.Setting Up Fax/Tel ModeWhen you select Fax/Tel Mode from the Data Registration menu, you canalso set the following options.❏ RING START TIMEWhen a call comes in, the machine checks to see if it is a personwishing to speak to you or a fax machine trying to send a document.If your machine does not have enough time to detect the fax tone, itassumes the call is from a telephone. Use the RING START TIMEsetting to increase the time the machine takes to check whether a callis from a fax machine or a telephone. You can select a time between 0and 30 seconds; the default is 8 seconds.Receive ModeReceive ModeStopl-1100.book Page 5 Friday, December 13, 2002 5:07 PM
