7-10 Receiving Faxes Chapter 7HT1-2205-000-V.1.0 LSL User’s GuideReceiving Faxes Manually: MANUAL MODETo use this mode, you must have the handset or a telephone connected tothe machine. See “Attaching the Handset to Your Machine,” on page 2-13.In MANUAL MODE, the machine rings every time it receives a call,whether the call is from a telephone or a fax machine.Make sure the REMOTE RX setting in the RX SETTINGS menu isenabled. See pages 15-9 and 15-10 for details.If you use your machine with MANUAL MODE, answer incoming callsas follows:1. When the handset or the telephone rings, pick up the receiver.If you hear a person’s voice:2. Start your conversation. If the caller wants to send a document aftertalking to you, ask them to press the start button on their machine.When you hear a beep, press Start/Copy to begin receiving thedocument, then hang up.If you hear a slow beep or silence:2. A fax machine is trying to send you a document.Press Start/Copy on the machine, then hang up.-or-Enter the two digit ID code from the telephone, then hang up.❏ The machine then begins receiving the document. (This isparticularly convenient if your telephone is located away fromthe machine.)NStart / CopyStart / Copy2 5Ex:l-1100.book Page 10 Friday, December 13, 2002 5:07 PM