Use WPA/WPA2Transmission is encrypted using a network key you specified.The security has been strengthened more than WEP.If a network key has not been set, the Authentication Type Confirmation screen isdisplayed automatically. To change network key settings before, click Configuration... todisplay the WPA/WPA2 Details screen.Changing WPA/WPA2 Detailed Settings5. Configuration...The detailed settings screen is displayed. The network password (WEP) or the WPA/WPA2 keyselected in Encryption Method: can be checked and changed.For more on WEP setting:Changing WEP Detailed SettingsFor more on WPA/WPA2 setting:Changing WPA/WPA2 Detailed Settings6. TCP/IP Setting:Sets the IP address of the printer to be used over the LAN. Specify a value appropriate for yournetwork environment.Get IP address automaticallySelect this option to use an IP address automatically assigned by a DHCP server. DHCPserver functionality must be enabled on your wireless router.Use following IP addressSelect this option if no DHCP server functionality is available in your setup where you use theprinter, or you want to use a particular IP address or a fixed IP address.• Wireless Routers Screen1. Detected Wireless Routers:The signal strength from the wireless router, encryption type, name of wireless router, and the radiochannel can be checked.Important• If you connect to a network that is not protected with security measures, there is a risk ofdisclosing data such as your personal information to a third party.280
