Using Card Slot over NetworkNote• This function is not available depending on the printer you are using. To make sure whether thisfunction is available with your printer, refer to List of Function for Each Model.Mounting Card Slot as Network DriveRestrictions on Card Slot Use over NetworkMounting Card Slot as Network DriveThe card slot must be mounted to use it over a network.To mount the card slot as the network drive, follow the procedure below.1. Insert memory card into card slot.2. Check current printer name.You can check the current printer name on the LCD of the printer.3. On Finder, click Go menu and Connect to Server.4. Input "smb://xxxxxxxxxxxx/canon_memory/" and click Connect.For example, if the current printer name is "123ABC000000", then input "smb://123ABC000000/canon_memory/".5. Make sure card slot is mounted.When the card slot is mounted, the following icon appears on the desktop or in the Computer windowon the Go menu of Finder.Note• The authentication screen may appear. If it appears, you do not need to input the password.• If you cannot mount the card slot with the method above, input the IP address of the machineinstead of the current printer name, and try again. For example, "smb://192.168.1.1/canon_memory/". If you mount the card slot with the IP address, you have to remount itwhenever the machine's IP address changes.Restrictions on Card Slot Use over Network• You cannot write data to a memory card in the card slot over a network. You can only read data froma memory card.296
