Administrator PasswordDepending on the printer you are using, an administrator password is specified at the time of purchase.The password is either "canon" or the printer serial number if it is specified.Model whose administrator password is specified as "canon":• The administrator password is specified as "canon" for the models below.MG7500 series, MG6700 series, MG6600 series, MG5600 seriesMG2900 series, MX490 series, MB5300 series, MB5000 seriesMB2300 series, MB2000 series, E480 series, E460 seriesiP110 series, iB4000 series, PRO-100S series, PRO-10S series• At the time of purchase, the user name "ADMIN" is also specified for the models above.• The following character restrictions apply to the password that you change:◦ Set the password by using 0 to 32 characters.◦ The allowed characters are single-byte alphanumeric characters.◦ For security reasons, we recommend you use 6 and more alphanumeric characters.Model whose serial number is used as the administrator password:• For the models other than the above, the printer serial number is used as the administrator password.Where Serial Number Is Located• The following character restrictions apply to the password that you change:◦ Set the password by using 4 to 32 characters.◦ The allowed characters are single-byte alphanumeric characters.◦ For security reasons, we recommend you use 6 and more alphanumeric characters.Important• You can change the password using one of the tools below. (Some tools may not be availabledepending on the printer you are using.)• operation panel of the printer• IJ Network Tool• printer information screen displayed on some Canon application software• If the password has been changed while you are sharing the printer and you do not know the password,ask the administrator of the printer you are using.• Set the password back to the default setting by initializing the printer settings.For more on initializing the printer, search for "UG067" or "UG505" on your printer's Online Manual andsee the instructions shown.330
