6. Use button to select Activate direct connect. and press OK button.7. Use button to select Yes and press OK button.The identifier (SSID) for direct connection appears.When a device detects the machine, the device detects the machine by the identifier (SSID).Note• If you press the right Function button, select Yes and press the OK button, the following itemsappear.• Security setting• Password• Machine's name which appears on a Wi-Fi Direct compatible deviceThe password is required when connecting a device to the machine. Depending on the deviceyou are using, no password is required.When you connect a Wi-Fi Direct compatible device to the machine, select the device namedisplayed on the LCD from your device.• The identifier (SSID) and the security setting are specified automatically. To update them, seebelow.Changing Direct Connection Setting8. Press OK button.The direct connection is enabled and a wireless communication device can be connected to themachine wirelessly.Changing settings of a wireless communication device and connecting it to the machineNote• Before connecting a device, we recommend you check the identifier (SSID) and the password for thedirect connection.To check the identifier (SSID) and the password, display them on the operation panel of the machineor print out the network setting information of the machine.LAN settingsPrinting Network Settings1. Turn on wireless communication on your device.Enable "Wi-Fi" on your device's "Setting" menu.For more on turning on wireless communication, see your device's instruction manual.2. Select "DIRECT-XXXX-MG5700 series" ("X" represents alphanumeric characters.) fromlist displayed on device.3. Enter password.Your device is connected to the machine.428
