Chapter 4 Copying 33X Adjusting exposure (density)Exposure (density) is the degree of difference between light and dark. Increasing the exposuresetting further blackens dark areas and whitens bright areas. Whereas decreasing the exposuresetting reduces the difference between bright and dark areas. You can adjust the exposure betweennine gradations.Follow this procedure:X Reducing or enlarging a copyYou can reduce or enlarge copies using three different methods:Preset copy ratios You can select one of the preset ratios to reduce or enlarge copies.Custom copy ratios You can specify the copy ratio in percentage to reduce or enlarge copies.Automatic ratios The machine automatically reduces or enlarges the image to fit the printmedia size.The following sections describe how to use these methods.1 Press [Menu] repeatedly until <3.DENSITY> appears.2 Use [W] or [X] to select the exposure.• Pressing [W] decreases the density, and pressing [X] increases the density.3 Press [OK/Set].3.DENSITY-LT DK+
