153AdditionalInformationECamcorder is turned off, or isnot set to PLAY (VCR) mode.The TAPE/CARD switch is setto CARD.Cassette is not loaded.Tape reached the end(“b ” flashes on thescreen).[AV/PHONESH] is set to[PHONESH] in the menu.[AV \ DV/ ] (MVX35i) or[AV \ DV] (MVX30i) is set to[ON].TV/VIDEO selector on the TVis not set to VIDEO.Video heads are dirty.You attempted to play backor dub copyright protectedtape.Speaker volume is turnedoff.[AV/PHONES H] is set to [AV]in the menu.Set the camcorder to PLAY(VCR) mode.Set the TAPE/CARD switch toTAPE.Load a cassette.Rewind the tape.Set [AV/PHONESH] to [AV] inthe menu.Set [AV \ DV/ ] (MVX35i)or [AV \ DV] (MVX30i) to[OFF].Set the selector to VIDEO.Clean the video heads.Stop playback/dubbing.Adjust the volume with theSET dial.Set [AV/PHONES H] to[PHONES H].Pressing the playbackbutton does not startplayback.Image will not appearon the TV screen.Tape is running, butimage will not appearon the TV screen.No sound from the built-in speaker.Noise comes out of theheadphones.28281428318631147–3030Playback
